Scanning Hardware Monitor Chip

  1. Monitor and Test

򥻤WAunھڤUBJӰAzDNiHDʪū׻PqA٦tTCLAƹWAѩDO]pPAҥHGܦiO~tC

ѩ lm_sensors whOȦ CPU ܪpA ҥHAܪGPڪƾOt㦹ɩγ\NniծդFC ծժBJ²ATwϥ sensors ܪGCӶإNNq (iHѦ BIOS w鰻GǨӱƦC) AMiJ /etc/sensors.conf iקYiC

1. DOաA}Y|@²檺AݴNnC

[root@linux ~]# sensors-detect

It is generally safe and recommended to accept the default answers to all

questions, unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.

You do not need any special privileges for this.

Do you want to probe now? (YES/no): YES

Probing for PCI bus adapters...

Use driver 'i2c-i801 for device 00:1F.3: Intel 82801FB 1CH6

Probe succesfully concluded.

2. UӪ氷AϥAN@ Enter NiHFAL۰ʥhC

I will now generate the commands needed to load the I2C modules.

Sometimes, a chip is available both through the ISA bus and an I2C bus.

ISA bus access is faster, but you need to load an additional driver module

for it. If you have the choice, do you want to use the ISA bus or the

I2C/SMBus (ISA/smbus)? ISA

To make the sensors modules behave correctly, add these lines to

/etc/modprobe.conf:

#----cut here----

# I2C module options

alias char-major-89 i2c-dev

#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----

# I2C adapter drivers

modprobe i2c-i801

modprobe i2c-isa

# I2C chip drivers

modprobe eeprom

modprobe it87

# sleep 2 # optional

/usr/bin/sensors -s # recommended

#----cut here----

3. WOIIiDAnpJҲժ@²檺dҰڡI

Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): YES

Copy prog/init/lm_sensors.init to /etc/rc.d/init.d/lm_sensors

for initialization at boot time.

4. pGQnT{@U sensors-detect 쪺GO_TAiHϥ lspci d\@UC

[root@linux ~]# lspci

00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)

K

K.

K

5. dO_Intel ICH6 C

6. קJҲոɮסC

[root@linux ~]# vi /etc/modprobe.conf

# I2C module options

alias char-major-89 i2c-dev

# N谻쪺ҲյLgJoɮ׷IoO kernel 2.6 I

7. ק@dz]wɮ /etc/rc.d/rc.localC

[root@linux ~]# vi /etc/rc.d/rc.local

# I2C adapter drivers

modprobe i2c-i801

modprobe i2c-isa

# I2C chip drivers

modprobe eeprom

modprobe it87

# sleep 2 # optional

/usr/bin/sensors -s # recommended

 



Install the Linux RPM (self-extracting) file | Configure LM_SENSOR.CONF

COM Version 1 | CHAPTER 1 - Environment | Configure SNMPD.CONF | COM-V1 RPM |

© um.co.ua -