MAINTENANCE SPECIFICATIONS SPEC

  1. Deposit additional money or face being forced out of his position. This is called margin maintenance.
  2. ELECTRICAL SYSTEM Specifications
  3. GENERAL TORQUE SPECIFICATIONS SPEC
  4. IVMAINTENANCE AND SERVICE
  5. List of dangerous and harmful production factors at technical maintenance of the object.
  6. Maintenance Procedure
  7. Maintenance Procedure

Item Standard Limit  
    Rear disck brake: YP125D YP150D   ---  
  Single disc 190 x 5,0 mm 4,5 mm 12 mm 32 mm x 1 DOT #4  
Type  
Disc outside diameter x tickness ---  
Pad thickness 0,5 mm  
Master cylinder inside diameter ---  
Caliper cylinder outside diameter ---  
Brake fluid type ---  
Front brake lever: Brake lever free play (at lever side)   2 ~ 5 mm   ---  
Rear brake lever: Brake lever free play (at lever side)   2 ~ 5 mm   ---  
Throttle cable: Free play   3 ~ 5 mm   ---  
         
CHASSIS

Item Standard Limit
    Steering system: Steering bearing type YP125D YP150D   ---
  Ball bearing
Front suspension:   90 mm   ---
Front fork travel
Fork spring free length 287,4 mm 284,9 mm
Spring rate (K1) 5,5 N/mm (0,55 kg/mm) ---
Stroke (K1) 0 ~ 100 mm ---
Oil capacity 130 cm3 ---
Oil level 120 mm ---
Oil grade Fork oil SAE 20 or equivalent ---
Inner tube vend limit --- 0,2 mm
Rear suspension:   90 mm   ---
Shock absorber stroke
Spring free length 266 mm 260 mm
Fitting length 248 2 mm ---
Spring rate (K1) 11 N/mm (1,1 kg/mm) ---
Spring stroke (K1) 0 ~ 90 mm ---
Front wheel: Type Rim size Rim material Rim runout limit radial lateral   Cast wheel MT3,50 x 12 Aluminium   --- ---   --- --- ---   1 mm 0,5 mm
Rear wheel:Type Rim size Rim material Rim runout limit radial lateral   Cast wheel MT3,50 x 12 Aluminium   --- ---   --- --- ---   1 mm 0,5 mm
Front disc brake:   Single disc   ---
Type
Disc outside diameter x thickness 220 x 4,5 mm 4 mm
Pad thickness 4,5 mm 0,8 mm
Master cylinder inside diameter 13 mm ---
Caliper cylinder outside diameter 28 mm x 2 ---
Brake fluid type DOT #4 ---
       




© um.co.ua -