На головну

To avoid damage to the bearing surfaces, do not use compressed air to dry the bearings.

  1. Align the hole in the bearing with the oil hole in the rod
  2. Avoid Negatives
  3. Avoidant personality disorder (замкнутий роздвоєння особистості) - ми
  4. Be sure to hold the front brake when removing the engine, or the motorcycle may fall over. The engine or the motorcycle could be damaged.
  5. Before removing the spark plug, use compressed air to blow away any dirt accumulated in the spark plug well, to prevent it from falling into the cham- ber.
  6. Before removing the spark plug, use compressed air to blow away any dirt accumulating in the spark plug wells to prevent it from falling into the cylinder.
  7. Check the driveshaft gaiters for signs of damage or deterioration

O Bearings

CIRCLIPS

1. Examine all of the circlips before re-assembly. Always replace circlips after removing them. Repla- ce distorted circlips. When installing a new circlip

O, check that the edged corner O is positioned

opposite the direction of the thrust O it receives. See the section drawing.

Shaft



IMPORTANT INFORMATION


GEN INFO


B-4


HOW TO USE THE CONVERSION TABLE




© um.co.ua - учбові матеріали та реферати